Landoll 7431 VT Plus User Manual Page 69
- Page / 98
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
4-1
Chapter 4
Operation and Maintenance
DANGER
DANGER
WARNING
WARNING
DANGER
DANGER
CAUTION
Never allow anyone to ride on the 7431 VT Plus at
any time. Allowing a person to ride on the
machine can inflict serious personal injury or
death to that person.
Disc blades are extremely sharp. Exercise
extreme care when working on or near disc
blades. Do not allow discs to roll over or fall onto
any bodily part. Do not allow wrenches to slip
when working near disc blades. Never push
wrenches toward disc blades. Do not climb over
machine above disc blades. Failure to stay clear
of disc blade edges can cause serious personal
injury or death.
All hydraulically elevated equipment must have
cylinder lockouts installed or be lowered to the
ground, when servicing or when equipment is
idle. Failure to take preventive measures against
accidental lowering can result in serious
personal injury.
7431-33 VT Plus models have two wheel and tire
sizes available. Do not install a tire made for a
standard 15” rim diameter on a 15.5” rim
diameter. Mixing wheel and tire sizes can result in
serious damage to the machine or serious
personal injury.
Always lock the tractor drawbar in the center
position when transporting the unit. Failure to do
so can result in serious injury or death and cause
damage to the equipment.
When transporting the unit, place cylinder
lockouts in the transport lock position after fully
extending the cylinders. Insert the lockout pins to
secure the cylinder lockouts. Failure to lockout
the cylinders can cause the unit to settle during
transport, which can result in serious injury or
death and cause damage to the equipment.
When transporting farm implements on public
roads, it is the responsibility of the operator to
abide by state and local laws concerning wide
loads, speed, safety emblems and safety lighting
equipment. Drive at safe speeds. Particularly
when rounding corners, crossing rough ground
or driving on hillsides, to prevent tipping the
tractor.
- Model 7431 1
- Operator’s Manual 1
- Table of Contents 3
- 5 Troubleshooting Guide 4
- Introduction 5
- Understanding Safety 6
- Statements 6
- Standard Specifications 7
- STANDARD SPECIFICATIONS 10
- LANDOLL CORPORATION 10
- Assembly Instructions 25
- ASSEMBLY INSTRUCTIONS 26
- 7431 VT Plus Frame and Hitch 27
- Assembly 27
- Leveler Assembly 29
- Manual Leveler 31
- Hydraulic Leveler (Option) 33
- Center Frame Tires 37
- Disc Gangs 37
- Wing Frames 37
- 3-16 F-561-0113 Edition 40
- 3-18 F-561-0113 Edition 42
- 3-20 F-561-0113 Edition 44
- 3-22 F-561-0113 Edition 46
- 3-24 F-561-0113 Edition 48
- Hydraulic Installation 49
- 3-26 F-561-0113 Edition 50
- Light and SMV Bracket 51
- 3-28 F-561-0113 Edition 52
- LED Light and SMV Bracket 53
- 3-30 F-561-0113 Edition 54
- Conditioner Reel Installation 55
- 3-32 F-561-0113 Edition 56
- 3-34 F-561-0113 Edition 58
- 3-36 F-561-0113 Edition 60
- 7431 hyd reel assy op 61
- Reel Installation (Option) 62
- 3-40 F-561-0113 Edition 64
- Rear Tow Hitch Installation 65
- Rear Jack Installation 66
- Final Assembly 66
- Operation and Maintenance 69
- 7430 scraper adj 70
- Attaching to the Tractor 71
- Hydraulic Lift System 71
- 6230translock2 72
- Hydraulic Fold System 73
- 7431 installed locks 74
- 7431 stored locks 74
- General Operation 75
- Field Operation 75
- Leveling (Side to Side) 76
- OPERATION AND MAINTENANCE 77
- 7431levelmeas 77
- 7431wingliftadj 77
- 7431-20-wing-adj 77
- LEVELER HANDLE 78
- THIS LEVELER LINK IS 78
- NOT ADJUSTABLE. IT IS 78
- SET IN THE 3RD HOLE 78
- DOWN FROM THE TOP 78
- Hydraulic Leveler Adjustment 79
- Hitch Adjustment 80
- Scraper Adjustment 81
- Front Gauge Wheels 82
- Disc Blades 83
- DEPTH STOP TUBE 84
- DEPTH STOP 84
- DEPTH STOP HANDLE 84
- Wheel Bearing Maintenance 85
- Hydraulic Maintenance 85
- Transport 86
- Lubrication Maintenance 89
- Storage 90
- Chapter 5 93
- TROUBLESHOOTING GUIDE 94
Related products and manuals for Special machinery Landoll 7431 VT Plus
(96 pages)© 2020, manymanuals.com. All rights reserved. | 0.464 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals